Validation of a mathematical model developed for the solid state fermentation process of the sugar cane (Saccharum officinarum) with sweet potato (Ipomoea batata Lam)
Article Sidebar
Main Article Content
Abstract
It was verify that the parameters which affect predictions in a range of ± 30% variation were the substrate apparent density, the biomass/oxygen yield and the initial inoculum concentration. The heat capacity, thermal conductivity, porosity, biomass/substrate, biomass/water yields and higher biomass concentration did not cause variations in the results. The mathematical model allowed determining the total fermentation time and the time in which is necessary to turn the substrate to get a more efficient process.
Key words: solid fermentation, mathematic modeling, animal
feed
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).